Wireless Power Monitoring Kit (3 Circuits)

  • Sale
  • Regular price $154.73


Wireless Power Monitoring Kit (3 Circuits)

From air conditioners, washers and dryers to pool pumps and everything in between, it’s now possible to monitor where energy dollars in your home are being spent, then find ways to reduce them through clever scheduling during off-peak hours.

Make the most of excess daytime solar power with iZone’s unique power diversion feature. Instead of diverting the excess power generated by daytime solar back into the electricity grid for a very small dollar return, this excess power can be used to pre-cool or pre-heat your home.

 

Specification:    
Power supply 2 x AA batteries  
Connection To be installed by a licenced electrician in accordance with AS/NZ 3000:2007 Electrical installations.  
Control frequency 433 Hz  
Temperature range -20°C to +50°C  
Environment Suitable for indoor or outdoor use. The CPMD must not be located inside a steel switch board or cabinet as this will prevent RF transmission of readings.  
Measured current range 20mA to 80Amp  
Accuracy This device is for monitoring only and is not recommended for calculation of actual power consumption. Accuracy can be up to 98% over an extended period but will vary as the voltage and power fluctuates at the property.  
Sensitivity The device will measure in 1W increments down to 5W  
Size & Weight (exludes leads) CPMD CPMCT
Height: mm 100 46
     
Width: mm 70 30
     
Depth: mm 30 30
     
Cable Dia: mm N/A 15.5
     
Weight: g 205 90